DTech Powerstroke Remanufactured 6.0L Injector (Improved Design)

DTech is proud to introduce our 3rd generation re-manufactured 6.0L injectors. These injectors incorporate many production and quality process improvements resulting in a significantly lower price.

Injector remanufacturing is always a trade-off between reusing and replacing parts while maintaining the highest quality level. With our 2nd generation 6.0L injectors we replaced many used parts on a 100% basis. This resulted in a higher quality product but at a price that made it difficult for DTech dealers to compete with Ford dealers in many parts of the country. Since then, we have been revising our re-manufacturing process and with our 3rd generation injector we can provide an excellent remanufactured injector at a significantly reduced price. Injector O-rings and copper washer included. 

The D-Tech Difference:

• Replacement parts have been developed for the spool, coil wire assembly, plunger, nozzle, shims, springs, screws, and o-rings.
• Using inspection and remanufacturing processes developed over the past five years, plus employing stringent parts reuse guidelines, we have been able to significantly lower our per injector cost.
• Cores are a significant remanufacturing cost and we have been able to lower our per injector core acquisition cost.
• Lower injector core cost plus the ability to greatly improve core utilization by replacing worn components with new parts, instead of scrapping an injector core, allows us to maintain a high level of quality at a lower per injector cost.

(1) Engines built prior to 9/22/2003.
F-250 - F-550, Excursion. Engine S/N 0 - 137745 Huntsville, AL
F-250 - F-550, Excursion. Engine S/N 6000000 - 6155636 Huntsville, AL
F-650 - F-750 S/N 0 - 112360 Huntsville, AL