DTech DT60FICM-CS 58V Fuel Injection Control Module (FICM)

The D-Tech DT60FICM-CS Fuel Injection Control Module has increased voltage from 48 volts to 58 volts to help improve hard starting problems in cold weather. This remanufactured FICM is pre-programmed and does not require any "flashing" from Ford for F-250 through 550 models.

Features:

• 58 Volts 
• Improved Cold Weather Starting 
  

Heavy-Duty Application Note: Ford F650/750 applications use the VT365 engine with the Navistar engine management system. When the FICM is installed on the F650/750 the engine will run, but the check engine light will be turned on and a DTC is set.  The DTC is 613. PCM/IDM software is incompatible. The FICM will need to be reprogramed with the appropriate Navistar device.

All DTech products are warranted to be free from defects in material or workmanship for a period of 12 months or 100,000 miles from date of original product installation, whichever occurs first. We will replace any part that fails during the warranty period and is determined to be defective in material or workmanship. If defective product is replaced it will be warranted for either the remainder of the original warranty period or 120 days, whichever is longer. We will also pay standard labor rates and times for product removal and reinstallation